TeamRedMiner v0.7.9 (AMD GPU miner) Download and Configure
TeamRedMiner – This is an optimized miner for AMD graphics cards only. Miner ethash, kawpow, nimiq, lyra2z, phi2, lyra2rev3, x16r, x16rv2, x16s, x16rt, MTP, cuckarood29, cuckatoo31, chukwa-512, cryptonight R, cryptonight v8 and a lot of other cryptonight variants.
Changes in v0.7.9
- Fixes for mixed rig mining on Linux.
- Added –eth_epoch argument for easier epoch testing.
- Added –eth_aggr_mode for automatic aggressive ‘B’ mode on Polaris 8GB gpus.
- Added –watchdog_disable argument.
System requirements:
- Current and supported driver version
- For cryptonight and lyra2rev3 algorithms, only amdgpu-pro drivers 18.30 and later are supported on linux. ROCm is not supported.
Card Support (GPUs):
- RX 5700(XT)/5600(XT)/5500(XT) for kawpow and ethash only.
- Radeon VII
- RX Vega 64/56, Vega FE
- RX 580/570/480/470
- RX 560/550
Algorithm support and their Dev Fee:
- Ethash on Polaris GPUs 0.75%
- Ethash on all other GPUs 1.0%
- Kawpow 2.0%
- Nimiq 2.5%
- Cryptonight R: 2.5%
- Cryptonight v8 upx2: 2.5%
- Cryptonight v8 turtle: 2.5%
- Cryptonight v8 half: 2.5%
- Cryptonight v8 double: 2.5%
- Cryptonight v8 rwz: 2.5%
- Cryptonight v8: 2.5%
- Cryptonight heavy: 2.5%
- Cryptonight haven: 2.5%
- Cryptonight saber: 2.5%
- Cryptonight conceal: 2.5%
- Chukwa-512 (Turtlecoin): 2.5%
- x16r: 2.5%
- x16rv2: 2.5%
- x16s: 2.5%
- x16rt: 2.5%
- MTP: 2.5%
- Cuckatoo31: 2.5%
- Cuckarood29: 2.5%
- Lyra2rev3: 2.5%
- Lyra2z: 3%
- Phi2: 3%
Configuring TeamRedMiner
- Download the program
- Unzip to any convenient location
- Enter your wallets into .bat files
- Increase profits by increasing intensity and fine-tuning the program
The miner is configured only through a batch file (file with the .bat extension). You do not need to configure the configuration (there is auto-tuning).
teamredminer.exe
– indicates which application will be launched. This file must be in the same folder as the .bat file-a kawpow
– specify the algorithm for mining. For Ravencoin, we specifiedcnr
, while for Zcoin we would specifymtp
us.rvn.minermore.com
after the long construction-o stratum + tcp: //
we indicate the pool address: 4501
– after specifying the pool address, put a colon and write the pool port. The address and port can be found on the pool itself. Usually under Get Started or Help-u RKAeArXkWLNERjWo5YF3R1xFnYCwKf11sX
– specify the wallet that will be used for mining. In our case, this is Ravencoin.-p x
– The p command means a password. The minermore pool (as well as 90% of all pools) does not require a password, so we write xpause
is an optional command. It is only needed so that the program does not immediately close in case of an error, but displays it.
Ready example
teamredminer.exe -a kawpow -o stratum+tcp://us.rvn.minermore.com:4501 -u RKAeArXkWLNERjWo5YF3R1xFnYCwKf11sX.trmtest -p x pause
Recommended New Articles:
- XMRIG v6.3.1: Download CPU / GPU miner for Windows / Linux
- GMiner v2.19 [AMD / NVIDIA] Download & Configure for Windows & Linux
- GMINER v2.11: BeamHashIII (NVIDIA); Cuckatoo32 (+ 5-8%, DevFee 2%)
- Polaris Bios Editor 3 PRO (Repack): редактор BIOS AMD RX 460/470/480/560/550/570/580
- SmartMinerPRO+ (SMP+): new CPU/GPU/ASIC/FPGA GUI Miner [Download for Windows]
- XMRig v6.2.2: CPU/GPU miner RandomX, KawPow, CryptoNight, AstroBWT and Argon2
- Z-ENEMY v2.6.2 (DevFee 1%): NVIDIA GPU CUDA miner for Windows